A
-
ABAQUS software
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
-
Analytical model
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2021, Pages 1-9]
-
Applied torque
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Artificial sample
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2021, Pages 10-19]
B
-
Bearing Capacity
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2021, Pages 71-95]
-
Bit load
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Bit penetration rate
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Bit rotational speed
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Borehole breakout
Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
-
Borehole breakout
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2021, Pages 1-18]
-
Breakout
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2021, Pages 85-103]
C
-
Clustering
Reservoir Characterization Clustering Analysis to Identify Rock Type
Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2021, Pages 35-47]
-
Computational Fluid Dynamic
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Concrete
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2021, Pages 10-19]
-
Core
Reservoir Characterization Clustering Analysis to Identify Rock Type
Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2021, Pages 35-47]
-
Crack propagation
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2021, Pages 1-18]
-
Cutting force
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2021, Pages 1-9]
D
-
Discrete Fracture Network
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2021, Pages 35-47]
-
Distinct Element Method
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Drilling
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Drilling fluid flowrate
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
-
Drilling Process
Experimental study of drilling operation with changing the effective parameters on drilling specific energy [Volume 4, Issue 1, 2021, Pages 53-66]
E
-
Effect. of porosity
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2021, Pages 68-84]
-
ELM
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2021, Pages 35-49]
-
Ensemble model
Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2021, Pages 48-59]
-
Experimental Evaluation
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2021, Pages 60-75]
F
-
Feature selection
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2021, Pages 96-113]
-
Fibrous fiber
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2021, Pages 10-19]
-
Finite element method
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2021, Pages 1-18]
-
FLAC3D
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2021, Pages 48-67]
-
Fluent
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Formation Fracture Gradient
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2021, Pages 60-75]
-
Fracture Conductivity
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2021, Pages 50-70]
-
Fracture gradient
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Fracture mechanics
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2021, Pages 1-18]
G
-
Gaussian Mixture Modelling
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
-
Gene expression programming
Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
-
Geocell-reinforced soil wall
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2021, Pages 71-95]
-
Geomechanic
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2021, Pages 19-34]
-
Geomechanical Model
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2021, Pages 85-103]
-
Geomechanical Model
Investigation of Geomechanical Parameters of Aquifer in Underground Natural Gas Storage Process [Volume 4, Issue 4, 2021, Pages 1-18]
H
-
Hole cleaning
The effect of stabilizer on the cleaning of the annulus in an experimental flow loop with the construction of its simulated model [Volume 4, Issue 1, 2021, Pages 22-42]
-
Hybrid Machine Learning
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2021, Pages 96-113]
-
Hydraulic conductivity
Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
-
Hydraulic fracturing
Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
-
Hydraulic fracturing
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
-
Hydraulic fracturing
Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2021, Pages 20-34]
-
Hydraulic fracturing
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2021, Pages 35-47]
I
-
Indirect BEM
Numerical modeling of borehole breakouts formation in various stress fields using a Higher-Order Displacement Discontinuity Method (HODDM) [Volume 4, Issue 3, 2021, Pages 1-18]
K
-
KGD model
Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2021, Pages 20-34]
-
K Means Clustering Modelling
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
L
-
Lithology
Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2021, Pages 48-59]
-
Loss Circulation Material
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2021, Pages 60-75]
-
LSSVM-PSO
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2021, Pages 96-113]
M
-
Machine Learning
Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2021, Pages 48-59]
-
Machine Learning
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2021, Pages 35-49]
-
Machine Learning
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
-
Maroon field
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2021, Pages 85-103]
-
Mature Field
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2021, Pages 50-70]
-
MLP
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2021, Pages 35-49]
-
Mogi-Columbus
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2021, Pages 85-103]
-
Mogi-Coulomb
Evaluation of Breakout by Mogi-Coulomb Failure Criterion as a Method for Estimating in situ Stresses [Volume 4, Issue 1, 2021, Pages 80-104]
-
Mohr-Columbus
Comparative Study of Failure Criteria to Determine Safe Mud Weight Window in one of the oil wells southwestern Iran [Volume 4, Issue 4, 2021, Pages 85-103]
-
Multiscale
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2021, Pages 19-34]
-
Multistage Hydraulic Fracturing
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2021, Pages 50-70]
N
-
Numerical modeling
Numerical modeling for investigating the effect of thermal stress on fracture pressure and principal stresses in hydraulic fracturing creation process in rocky environment [Volume 4, Issue 1, 2021, Pages 67-79]
-
Numerical modeling
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2021, Pages 35-47]
-
Numerical modeling
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2021, Pages 71-95]
O
-
Oil-contaminated soil
Effect of oil-contamination on behavior of geocell-reinforced soil abutment wall [Volume 4, Issue 3, 2021, Pages 71-95]
-
Oil Reservoir
Evaluation of the production rate efficiency of the deformable oil reservoir using enhanced multiscale method [Volume 4, Issue 3, 2021, Pages 19-34]
P
-
PDC bit
Developing an analytical rock-bit interaction model considering in-situ stresses and case study for one of Iranian oil fields [Volume 4, Issue 2, 2021, Pages 1-9]
-
Perforation
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2021, Pages 48-67]
-
Permeability
Creating artificial samples to investigate effect of fracture parameters on permeability [Volume 4, Issue 2, 2021, Pages 10-19]
-
Permeability
Designing an Ensemble model for hydrocarbon reservoir Permeability prediction by petrophysical lithology Labeling [Volume 4, Issue 2, 2021, Pages 48-59]
-
Petroleum
Numerical investigation of natural discontinuities in hydraulic fracturing using discrete fracture network [Volume 4, Issue 4, 2021, Pages 35-47]
-
Preventive Approach
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2021, Pages 60-75]
R
-
Reservoir
Reservoir Characterization Clustering Analysis to Identify Rock Type
Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2021, Pages 35-47]
-
Rock
Effect of porosity and confining pressure on hydrulic fracturing mechanism using experimental tests [Volume 4, Issue 4, 2021, Pages 68-84]
-
Rock Type
Reservoir Characterization Clustering Analysis to Identify Rock Type
Using KMEANS Method in South West Iranian Oil Field [Volume 4, Issue 2, 2021, Pages 35-47]
S
-
Safe mud weight window
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Sensitivity analysis
Sensitivity analysis of effective factors for estimating formation pore pressure using a new method: the LSSVM-PSO algorithm [Volume 4, Issue 3, 2021, Pages 96-113]
-
Shear failure gradient Double
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Shear wave velocity
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2021, Pages 35-49]
-
Strain Softening Hardening
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2021, Pages 48-67]
-
Stress Anisotropy
Investigation of strain shear plastic, displacements and stress concentration for lessening the amount of sand production and increasing oil production. [Volume 4, Issue 4, 2021, Pages 48-67]
-
Supervised machine learning
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
T
-
Thermal effects
Investigating the thermal effects on hydraulic fracturing propagation and response of numerical models [Volume 4, Issue 1, 2021, Pages 43-52]
-
Tight Sandstone
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2021, Pages 50-70]
U
-
UFD method
Design and optimization of hydraulic fracturing by combination of UFD method and two-dimensional KGD model in a hypothetical reservoir [Volume 4, Issue 2, 2021, Pages 20-34]
-
Unconventional Resources
Rejuvenation of a Mature Tight Sandstone Oil Reservoir through Multistage Hydraulic Fracturing: A Case Study of a North African Basin [Volume 4, Issue 3, 2021, Pages 50-70]
-
Unsupervised Machine Learning
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
W
-
Wellbore stability analysis
Determination of optimized mud weight for vertical wellbore drilling in fractures formation : A case study for SIE-04 wellbore in Persian Gulf oilfield [Volume 4, Issue 1, 2021, Pages 1-21]
-
Wellbore Strengthening
An Experimental Study of LCM Effect on Formation Fracture Gradient to Improve Wellbore Strengthening [Volume 4, Issue 2, 2021, Pages 60-75]
-
Well Log Data
Prediction of Shear Wave Velocity by Extreme Learning Machine Technique from Well Log Data [Volume 4, Issue 3, 2021, Pages 35-49]
X
-
XGBoost Algorithm
Determination of geomechanical zones based on evaluation of Unsupervised Machine Learning algorithm methods [Volume 4, Issue 4, 2021, Pages 19-34]
Your query does not match with any item